Ahhh, summer time!
If you have been missing some of my regular blogs, it is because I have been working on my new waterfront vacation house. Internet service is yet to be connected.
But here is a photo of the current major project: building safer wooden steps that lead from the house down a steep trail to the waterfront on little Lake Walker, a non-motorized 12-acre lake at the foot of Mt Enumclaw in King County, WA.
New drop ceiling panels will be going in; the overgrown yard has been tamed, revealing a large fire pit and access to 48' of lakefront with a dock (also needing repair); roof maintenance, which includes resealing paint on top; sealing up any places for rodents to enter; and some cosmetic painting.
So thankful to have some financial partners who really know construction!
Happy Investing!
Showing posts with label home repair. Show all posts
Showing posts with label home repair. Show all posts
Friday, August 12, 2016
Wednesday, December 10, 2014
Wednesday, April 6, 2011
Installing & Maintaining a GFCI (Ground Fault Circuit Interrupter)•
Installing & Maintaining a GFCI (Ground Fault Circuit Interrupter)•
I work with some pretty capable and competent real estate professionals, to provide the very best service to my clients. In fact, I use them myself on my own investment properties! The following article is courtesy A-Pro home inspector Jesse Longman:
You may have heard of a GFCI (ground fault circuit interrupter) or GFI (ground fault interrupter). The GFCI is a valuable safety device that should be installed in bathrooms, kitchens and any other rooms with a sink; in the garage; near pools; and at all exterior outlets.
• If your home is fairly new, it already has GFCIs. They have been required in new construction and remodeling for about 15 years. If you are spending the money to remodel a kitchen or bathroom, add GFCI outlets there and at every other spot in your home where damp or wet conditions occur. Hire an electrician to do this job.
• The GFCI uses sensitive circuitry to prevent shocks. A tiny imbalance in the power and neutral line will trip the GFCI. The imbalance indicates the possibility of current leakage that could deliver a shock.
• GFCI outlets or circuit breakers provide a high level of safety for a very small cost. The GFCI outlet can cost less than $10. In most locations, it can be installed in just a few minutes.
• Don't confuse a GFCI with the fuse or circuit breaker in the basement. The fuse or breaker protects the wire from overloading, overheating and burning. A fuse will allow 15 or 20 amps to flow through the circuit before it trips-that's more than enough power to electrocute you.
• Once the GFCI is installed, test it monthly with the test/reset button on the face of the breaker or outlet. Push the test button, and the GFCI will trip. Reset the GFCI by pressing the reset button. Often a GFCI outlet in one bathroom also protects other bathrooms, the garage, and exterior outlets.
I work with some pretty capable and competent real estate professionals, to provide the very best service to my clients. In fact, I use them myself on my own investment properties! The following article is courtesy A-Pro home inspector Jesse Longman:
You may have heard of a GFCI (ground fault circuit interrupter) or GFI (ground fault interrupter). The GFCI is a valuable safety device that should be installed in bathrooms, kitchens and any other rooms with a sink; in the garage; near pools; and at all exterior outlets.
• If your home is fairly new, it already has GFCIs. They have been required in new construction and remodeling for about 15 years. If you are spending the money to remodel a kitchen or bathroom, add GFCI outlets there and at every other spot in your home where damp or wet conditions occur. Hire an electrician to do this job.
• The GFCI uses sensitive circuitry to prevent shocks. A tiny imbalance in the power and neutral line will trip the GFCI. The imbalance indicates the possibility of current leakage that could deliver a shock.
• GFCI outlets or circuit breakers provide a high level of safety for a very small cost. The GFCI outlet can cost less than $10. In most locations, it can be installed in just a few minutes.
• Don't confuse a GFCI with the fuse or circuit breaker in the basement. The fuse or breaker protects the wire from overloading, overheating and burning. A fuse will allow 15 or 20 amps to flow through the circuit before it trips-that's more than enough power to electrocute you.
• Once the GFCI is installed, test it monthly with the test/reset button on the face of the breaker or outlet. Push the test button, and the GFCI will trip. Reset the GFCI by pressing the reset button. Often a GFCI outlet in one bathroom also protects other bathrooms, the garage, and exterior outlets.
Thursday, September 2, 2010
Window Types and Maintenance
Here's some very good information on window maintenance from my favorite home inspector Jesse Longman with A-Pro:
There are many styles and types of windows. They may be single hung with one sash that goes up and down or double hung with two movable sashes. If the sash moves sideways it is called a slider. Hinged on the side and opening out is called a casement. Hinged at the top is an awning, and hinged on the bottom is a hopper.
There are a wide variety of glass options available today including:
Single Pane: Used almost exclusively until about 1950. Only one pane of glass is used in this type of window.
Double Pane: Double glazed windows have two panes of glass. The space in between is filled with a dried air or an inert gas such as “Argon”. If the seal in between the glass is lost, condensation may develop between the two panes and make the glass difficult to see through. Defective seals cannot be repaired. Discolored glass must be replaced.
Tempered Glass: Tempered glass is made three to five times stronger than regular glass by heating it and then cooling it very quickly. When the surface layer of tempered glass is broken, the entire pane shatters into small rectangular pieces.
Laminated Glass: A layer of plastic is sandwiched between two layers of glass to prevent broken pieces from being released if a pane is cracked or shattered.
Window Maintenance
Periodically inspect the exterior of the windows for physical damage or signs of water damage.
Check for broken, cracked, loose, or missing glass. Check double paned units for signs of seal failure (fogging between the glass).
Regularly check the windows for drafts and smooth operation. Clean & oil regularly. Check for peeling paint.
There are many styles and types of windows. They may be single hung with one sash that goes up and down or double hung with two movable sashes. If the sash moves sideways it is called a slider. Hinged on the side and opening out is called a casement. Hinged at the top is an awning, and hinged on the bottom is a hopper.
There are a wide variety of glass options available today including:
Single Pane: Used almost exclusively until about 1950. Only one pane of glass is used in this type of window.
Double Pane: Double glazed windows have two panes of glass. The space in between is filled with a dried air or an inert gas such as “Argon”. If the seal in between the glass is lost, condensation may develop between the two panes and make the glass difficult to see through. Defective seals cannot be repaired. Discolored glass must be replaced.
Tempered Glass: Tempered glass is made three to five times stronger than regular glass by heating it and then cooling it very quickly. When the surface layer of tempered glass is broken, the entire pane shatters into small rectangular pieces.
Laminated Glass: A layer of plastic is sandwiched between two layers of glass to prevent broken pieces from being released if a pane is cracked or shattered.
Window Maintenance
Periodically inspect the exterior of the windows for physical damage or signs of water damage.
Check for broken, cracked, loose, or missing glass. Check double paned units for signs of seal failure (fogging between the glass).
Regularly check the windows for drafts and smooth operation. Clean & oil regularly. Check for peeling paint.
Subscribe to:
Posts (Atom)
